Descripción
8 Capsule Spatial Audio Capture
· Dante audio network interface up to 32-bit / 192 kHz
· Capture quiet nature sounds or loud concerts with capsule
SNR of up to 78dB-A and 136 dB Max SPL
· Configurable output for surround, ambiX & virtual mics
· Power Over Ethernet (PoE)
· Individually calibrated for balanced array
· Professional quality analog to digital conversion, high
resolution Skyworks clocking scheme and built-in 32-bit
XMOS Processor.
· DAW plugin (VST3, AU & AAX) and MicNet Control app for
remote configuration
High spatial resolution made possible with 8 analog capsules for 2nd Order Ambisonics. Record the raw output
and decode in post with the included Spatial Mic Converter Plugin, or natively on a Dante network for
surround or virtual mic feeds.
360O Creativity
MicNet Control App
MicNet Control provides remote control of the analog stage and internal DSP processing of Spatial Mic Dante. Computers on the Dante network running MicNet Control can change the parameters of any microphone on
the network.
MicNet Control can change the audio output format which is accomplished in the microphone itself via DSP. Output options include unprocessed (for Spatial Mic Converter Plugin), 1st order ambisonics, surround feeds and virtual mic mono or stereo pairs. These additional options beyond unprocessed audio open up many applications for live performance and broadcast when low latency audio feeds are needed.
Spatial Mic Converter Plugin
The Spatial Mic Converter plugin transforms the raw unprocessed audio signals from Spatial Mic USB & Dante to a number of different formats suitable for any type of audio production. To accomplish this,
Spatial Mic Converter uses an internal 64-channel filter matrix and measurements from an anechoic chamber.
Specifications
ELECTRICAL
· Up to 8 channels streaming over standard IP network
· Output mode streaming over network: Unprocessed ( 8 channels), 5.1 surround (6 channels), 5.1.2 surround (8 channels), 7.1 surround (8 channels), virtual mic pattern decode (2 channels).
· NE8FBH-C5 locking etherCON compatible, also compatible with standard
RJ45 connectors
· Digital performance over Dante network: 44.1 kHz, 48 kHz, 88.2 kHz, 96
kHz, 176.4 kHz and 192 kHz (-4% / -0.1% / +0.1% / +4.167%) up to 32-bit
· AES67 mode at 48 kHz / 32-bit
· DSP: 32-bit XMOS with 16 real-time logical cores
· DSP Modes: Unprocessed up to 192 kHz, all other decoding modes up to
48 kHz
· Clock source: internal or from Dante network primary
· ADC: 114-dB per channel at 24-bits
· Power: complies with IEEE 802.3af PoE
· Power consumption: 4.8W max
· Thermal: Operates at up to an ambient temperature of 45 degrees Celsius
· Plugin DSP filter: 64-element frequency dependent output filter matrix
· Individual calibration stored in each mic for balanced array sensitivity
CAPSULE & ARRAY
· 8 x14mm Prepolarized Condenser Capsules
· SNR: 78dB-A at 1 kHz
· Frequency Response: 20Hz to 20kHz
· Max SPL: 136dB @1kHz
· Array: 8 transducers
MECHANICAL
· Construction: Aluminum & Nylon
· Spatial Mic Dante Dimensions: Height: 7.65 in
(19.4cm) Diameter: 2.25 in (5.7cm)
· Weight (Mic only): 0.86lbs
