Descripción
BiG [Studio] spectacularly enlarges the stereo image and opens up new creative ways of sound shaping.
BiG [Studio] expands the possibilities of sound shaping with a new tube circuit. The Tube Harmonics control refines the harmonic spectrum of every signal, making it more vivid, detailed and increased in size – bigger than life!
Visually, BiG [Studio] sports the black design of the SPL Studio series.
The internal audio voltage of +/- 18V ensures great sound!
Redefines the big of stereo.
BiG is special.
BiG is unique.
BiG [Studio] enlarges the stereo image
in a new manner and opens up
new creative ways of sound shaping.
Intuitive with just three controls.
Range
With the Range control, the frequency range which
should be processed can be selected.
Stage
With the Stage control, the frequency range previously selected
with the Range control can be moved backwards or forwards on
the stereo stage.
Bigness
The Bigness control adjusts the intensity
of the stereo image shaping.
Black magic?
In BiG [Studio] a diff erence signal derived from the input signal is
processed by an analog filter network before mixed back to the original
signal in a special mixing stage. This is not M/S processing but a
completely diff erent and new way of stereo-processing.
The processed stereo signal, when summed to mono, creates a
clean mono signal without phase shifts, cancellations, or other
unwanted artifacts.
Tube Magic
Tube Harmonics
The Tube Harmonics control adjusts the intensity
of the harmonics generated in the tube.
Harmonics
When the Harmonics switch is activated, the tube circuit which
generates harmonics is in the signal path.
If this switch flashes, the device is in “warm-up” mode.
The tubes are being brought to the optimum operating
temperature
More bass!
The bass switch can be used to activate an additional bass boost
at the end of the BiG [Studio] processing chain.
The bass boost is performed by a filter similar to the one
used in the AirBass function of the SPL IRON Mastering Compressor.
Let’s go!
PWR
The PWR LED indicates that BiG [Studio] is powered
and that the device is switched on via the On switch
on the rear of the device and is ready for operation.
On
The On switch activates BiG [Studio].
When activated, the switch lights up.
If the device is in bypass mode,
the switch is not illuminated.
Inputs and outputs
All inputs and outputs of the BiG [Studio] are equipped with Neutrik XLR sockets with gold-plated contacts
and Neutrik TRS sockets. The XLR and jack sockets are connected in parallel.
Signal transmission is electronically balanced at a nominal level of +6 dB.
Ground
The ground switch on the rear panel of the BiG [Studio] can be
used to eliminate ground loops by disconnecting the internal
ground from the housing ground when the switch is pressed.
Looks great, feels great
– and lasts for a lifetime
BiG [Studio] has a 4 mm thick, black anodized aluminum front panel and aluminum knobs
milled from solid. The housing is made of high-quality steel and is powder-coated
in elegant black
Sounds good
With all SPL devices we develop not only according to plan, but also by ear.
Many important components are installed on the circuit boards using Through-hole technology.
This way we can ensure that we can use the best sounding components.
Specifications
Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio +/- 18 V
Operating voltage LEDs & Relays +12 V
Tubes anode voltage +230 V
Tubes heating voltage +12,6 V
Mains Power Supply
Mains voltage (selectable) 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V T 312 mA
Fuse for 115 V T 630 mA
Power consumption max. 9,9 VA
Analog inputs & output; XLR & TRS Jack (all balanced)
Maximum input and output gain +22.5 dBu
Input impedance 20 kΩ
Output impedance 112 Ω
Common mode rejection (1 kHz) < 75 dB
Frequency range (-3 dB) 10 Hz–200 kHz
THD + N (0 dBu, 10 Hz–22 kHz) 0,0035 %
Noise (A-weighted) -97,5 dBu
Dynamic range 120 dB
Bass frequency 42 Hz
Bass boost 2 dB
Harmonics frequency 6 kHz
Harmonics boost max. 9 dB
Dimensions & Weight
W x H x D (width x height x depth) 482 x 44 x 210 mm
19 x 1,73 x 8,27 inch
Unit weight 3,85 kg
8.49 lbs
Shipping weight (incl. packaging) 4,9 kg
10.8 lbs
