Descripción
The F388-2-Q is a powerful and durable headphone amplifier in 19 «format with two + two balanced stereo inputs on the back. It feature 4 identical amp section each with a volume and a balance control. The stereo signal from module 1 can be looped through to module 2 with a link switch. Internally, Pre-Gain can be set to -12 / -6 / 0 / +6 / +12 dB to adapt the amp to virtually every source – headphone combination. The amplifiers feature a very low output impedance in order to drive low-impedance headphones without any coloration. Due to the unusual high internal operating voltage also with high-impedance headphones a more than adequate sound level is maintained.
Features
- 1x PHONE-AMP F388-2-Q
- 1x power cable
- 1x manual
scope of delivery
- 1x PHONE-AMP F388-2-Q
- 1x power cable
- 1x manual
technical data
| Item number: | 1006996 |
| housing | 19″ / 1 HE |
| headphone Out | 4 |
| Line I/O | 4 / 4 |
| dimensions | 483 x 44 x 166 mm (BxHxT) |
| power supply | Internal 230 V / 115 V AC |
| input sensitivity | + 6 dBu |
| input impedance | 10 kOhms |
| amplifier channels | 4 |
| max. output level | 425mW (600 Ohm) / 800 mW (300 Ohm) / 2250 mW (100 Ohm) / 1620mW (50 Ohm) / 1100 mW (32 Ohm) / 490 mW (16 Ohm) |
| crosstalk | < -80 dB |
| THD+N (@ -1 dBFs) | < 0.002 % |
| frequency range | 5 Hz – 50 kHz (-0.5 dB) |
| signal-to-noise ratio (SNR) | > 120dBA |
| series | Kopfhörerverstärker |
