Descripción
270 DEGREES OF REJECTION
The LS-308 offers 270 degrees of side and rear frequency rejection reducing nearby sound by up to 25dB. The rejection is achieved with Lauten Audios’ unique dual, large-diaphragm pressure gradient transducer element in combination with its specially designed circuit.
CLOSE PROXIMITY ENVIRONMENTS
The LS-308 is intended for use in environments where there are multiple sources in close proximity, for example, small live rooms with multiple musicians playing, close-quarter broadcast commentary, or when the rejection of other instruments or crowds live on-stage or in sound reinforcement is desired.
NO ATTENUATOR NEEDED
The LS-308 does not require pre-attenuation and can handle 135dB+ of SPL. The circuit also allows for an ultra-wide 120db of dynamic range. These features give engineers the ability to capture high dynamic sources and in noisy environments.
INDEPENDENT FILTERS
The Independent, multi-stage, high and low-cut filters help engineers balance recordings at the microphone and aid in successfully capturing the performance reducing the need for mixing. The 2-stage low-cut aids in reducing low-end rumble, muddiness, and proximity effect. The 2-stage high-cut helps tame bright instruments and high frequencies.
SHIPS FULLY ACCESSORIZED
- Swing-arm mount with 135 degrees of movement (removable)
- Hard mount with threaded nut and adjustable elbow joint.
- Foam windscreen to protect against plosives, wind, and debris
- Hard case that fits all accessories and is built for the rigors of the road.
FEATURES AND SPECIFICATIONS
- Full 120dB (135dB total) of dynamic range
- Wide frequency response
- Excellent off-axis sound rejection
- Independent 2-stage low & high-cut filters
- Internally shock mounted pressure dual-gradient condenser element
- Includes, hard mount, windscreen, and hardcase
- Type: Side-Address dual-large diaphragm pressure gradient transducer
- Polar Patterns: Second-order Cardioid
- Circuit: JFET transistor with transformer balanced output
- Frequency Range: 20Hz-20KHz
- Dynamic Range: 135dB
- Impedance: >150 ohms
- SPL Handling: >135dB (0.5%THD@1000Hz)
- Self-noise Level: <15dB-A
- Sensitivity: 10.5mV/Pa -40dBv(0 dB=1V/Pa kHz)
- Special Features:
50 & 120Hz low-cut
8 & 10 kHz high-cut filters
- Connector: 3-pin XLR
- Power Requirement: +48v Phantom power
- Weight: Microphone only: 1.25lbs – 0.57kg
w/ swing arm: 1.4lb – 0.64kg
w/ hard mount: 1.5lbs – 0.68kg
w/ case and accessories – 4.6lbs –2.09k - Dimensions (no case): Height: 7.25in (18.4cm)
Width (w/ arm): 2.46in (6.25cm)
Depth: 3.75in (9.53cm)
