Descripción
- condenser microphone
- cardioid
- small diaphragm capsule
- PE diaphragm
- transistor pre-amplifier
- phantom powering P48
specification
The M 300 stereo is a versatile microphone system for high-quality stereo recording. Different stereo microphone arrangements for recording in different stereophonic techniques can easily be realised and reproduced. The microphone system consists of a matched pair of M 300 small diaphragm capacitor microphones selected for both sensitivity and frequency response and includes the necessary stereo bar, microphone holders and riser to quickly set up an XY, ORTF, DIN or DINa stereo microphone array. All components are delivered as one system in a case.
technical data
| Studio Microphone | M 300 | |
| Polar pattern | cardioid | |
| Acoustic operating principle | pressure gradient transducer | |
| Frequency range | 20 Hz to 20.000 Hz | |
| Sensitivity at 1 kHz | 12 mV/Pa | |
| Output impedance | 100 Ohm | |
| Noise level | CCIR 468-4 | 26 dB |
| DIN EN 60268-4 | 16 dB-A | |
| Signal-to-noise ratio | CCIR weighted | 68 dB |
| A-weighted | 78 dB | |
| SPL for THD 0,5 % | 147 dB | |
| Dynamic range | 131 dB | |
| Current consumption | 3,3 mA | |
| Output connector | XLR3M | |
| Weight | 126 g | |
| Length | 130 mm | |
| Diameter | 21 mm | |
| Surface | dark bronze | |
