Descripción
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The C5300/WL is based on the same principle as the C5300, and can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility in order to move around on the stage in live productions.
The REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.
In order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:
SUPPORTED WIRELESS TRANSMITTERS:
SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M
SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
MORE ABOUT THE “/WL” MODEL:
The REMIC V5200/WL microphone model is the same as the normal REMIC V5200 model, only it comes with a custom selected connector. It delivers a natural and open sound, an extreme accuracy and fast transient response that captures the finest and most delicate overtones of the instrument.
The REMIC C5300 WL is used for studio & live performance of chamber, classical, jazz and folk music.
Superior gain before feedback.
Moderate suppression of neighbor instruments and ambient noise.
For moderate amplification of symphony orchestras, ensambles, bands and solists.
- BEST FEEDBACK SUPPRESSION
- BEST SOUND QUALITY
- BEST INNOVATIVE MOUNT
