\u00abThe DRS-8 mk2 is an 8 channel microphone pre-amp with 8 DI inputs. We know you will be as pleased with it\u2019s sonic qualities as we are. The DRS-8 mk2 has the advantages of more than 25 years experience in audio engineering, today\u2019s component and manufacturing technology, but still retaining that sound uniquely achievable through Class A design. Phoenix Audio is dedicated to the development of Class A discrete technology used within high build-quality equipment. The DRS-8 mk2 uses our well proven and loved Class A output stage (DSOP-2) coupled with our custom wound output transformer, but also has our latest breakthrough in transformerless Class A, Discrete, truly-balanced Mic Input Technology which gives a \u201cvalve-like\u201d sound. It also incorporates our high input impedance DI circuitry.<\/p>\n
Specifications<\/p>\n
Specifications<\/p>\n
2U half rack space unit: With 240V\/110V mains voltage input selector switch Class A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,
\nMaximum Output Level: +26dBu @ 1kHz
\nNoise: -90dB @ 20Hz to 20kHz.
\nConnections: Combo XLR\/1\/4\u201d XLR sockets on Rear Panel for Mic inputs & line inputs and switched jacks for DI inputs
\nOutput connections: XLR\u2019s on rear panel
\nAdditional outputs: 25 pin \u201cD\u201d style connector on the rear panel (wired Tascam Standard)
\nGain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
\nPhoenix Audio\u2019s unique Class A, transformer-less, True balanced Mic input stage with 10k impedance.
\nPhoenix Audio\u2019s custom wound output transformer.
\nGain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
\nGain reduction: -15dB push-button pad switch (Mic input)
\nHigh Input Impedance DI: Mono 1\/4\u2033 Jack on rear panel (no FETs) with 10 meg impedance
\nGain Meter: LED Metering. 5 LED Meter on each channel (with hysteresis)
\nDetented output control for recall, 21 positions
\nPhantom Power: Switchable phantom on Push-button Switch
\nHigh Pass Filter: Roll-off starts at 80Hz @ 12dB per Octave.
\nPhase Reverse: on Push-button Switch
\nFrequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
\nFrequency Response: DI Input Stage: -0.3dB @ 40Hz, \u2013 0.5dB @ 25kHz
\nTypical Headroom: +26dB on Mic-Pre stage
\nDI Stage gain: Maximum of 26dB (gain range typically 30db)
\nAll units are wired with PTFE silver military grade cable
\n\u00bb<\/p>\n