Powerful<\/h3>\n
The Mercury D Series G810 Rack System solves the biggest complaint for users of other ‘500 racks’ in the marketplace: Lack of Power, especially when using products that are not built to the specifications of the ‘500’ Standard. The products not built to that standard take more then their share of the power to work, which in turn causes problems with all other modules in the rack. This is not an issue with the Mercury D Series G810 Rack System.<\/p>\n
The power specification for Mercury D Series G810 Rack System is much higher than the spec of the ‘500’ Standard. Providing more power does not solve the power problems of ‘500’ Racks, so, Mercury successfully designed a better Power Structure not just providing more amps\/watts. Mercury designed the Mercury Power Regulation Circuit as a solution to ‘500’ Rack power problems. The Mercury Power Regulation Circuit is not only in the rack, it is on every channel of the rack offering individual regulation per channel. The Mercury D Series G810 Rack System is the first ‘500’ Rack to have this feature and is why we feel this is not only a better rack but a better system overall. The Mercury Power Regulation Circuit allows each channel to be isolated from the channel next to it or any other channel in the rack, which will protect from faults or emissions from problematic modules. No module in the Mercury D Series G810 Rack System shares DC power with another module in the rack.<\/p>\n
In addition of the Mercury Power Regulation Circuit, there is also the Mercury Soft Start Circuit featured in the Mercury D Series G810 Rack System as well. The Mercury Soft Start Circuit allows power to ‘ramp up’ slowly and will gradually and gently apply voltage to your expensive D Series or ‘500 Series’ modules when you power up. This is better for your modules as well it reduces the danger to woofers that could be damaged with ‘turn-on’ thump when part of a larger system.<\/p>\n
FRONT OF MERCURY G810 SYSTEM I & II<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nIt might not be the first thing you think of when buying equipment, but the power for any recording device is the foundation of how it works. In Professional Audio a clean, regulated and abundant power supply affects the headroom of your Preamps, Equalizers and Compressor\/Limiters etc… Stable, Abundant, Isolated power simply allows your equipment to work better and avoids cross talk between channels. For example, If you have a rack full of 8 or 10 limiters for drums you are going to hear things distort sooner on peaks if there is not enough power in reserve. We have solved those issues with the Mercury D Series G810 Rack System, allowing you to concentrate on recording music, not calculating the amperage or total power you need in your rack.<\/p>\n
Rock Solid Construction<\/h3>\n
The Mercury D Series G810 Rack System is simply built like a Tank. Featuring thick aluminum rack ears, and a durable steel chassis, for both strength and optimum shielding for internal electronics. Like all Mercury Recording Equipment Co. products, the Mercury D Series G810 Rack System is engineered to be reliable and look good in your studio but built to be road-worthy.<\/p>\n
\n\n\n\n\nOnly the MERCURY G810 SYSTEM I with G8 BLENDERS MODULE allows Parallel EQ or Compression for all 8 Channels!<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nMercury’s choice was an external PSU so power is shielded away from the modules inside the G810 Rack and to make room more innovative ideas in slots 9 & 10 with our G8 modules and build something more than a ‘rack’. The D Series PSU is also built in a steel chassis so it is shielded from your other equipment and does not pick up interference from outside sources.<\/p>\n
All these choices do affect how well a rack or any electronic device works for audio, but regardless, the DC power of the chosen PSU is then shared by every module in the rack. Either by a cable from external PSU to the rack or internally with a trace on the PCB or wire connecting power from one connector to the next. An easy analogy we use to describe how this works is: the Power Supply is a tree and a branch of the tree goes to each channel, so if there are 10 channels, the tree has 10 branches. But every channel has one source for its power. With the Mercury D Series G810 Rack System the analogy is much different. The D Series PSU is a forest of 10 trees and each channel of the G810 has its own tree and its own source of power.<\/p>\n
A slightly more technical explanation of how a Linear PSU works is: AC (Alternating Current) power (either 120V or 240V in this case) enters the PSU from your wall to with an AC cord to the PSU, it then goes to a Transformer or Transformers that convert(s) that AC voltage to a lower voltage (closer to your intended DC voltage). With an additional circuit, that lower AC voltage then is converted to DC (Direct Current) and regulated to a specific voltage to be stable for your intended device.<\/p>\n
With Mercury D Series G810 and D Series Power Supplies all that happens as well, but in a manner like no other rack on the market. It all starts in the PSU-1 or PSU-2 where the AC enters and is converted to Lower Voltages of AC with an additional circuit, that voltage then enters the G810 and is converted to Stable, DC Power at each EDAC connector for each channel\/module. This gives each channel its own source of Regulated DC power, and in effect its own Isolated Power supply.<\/p>\n
\n\n\n\n\nThe MERCURY G810 SYSTEM I with MERCURY G8 FADERS MODULE. Adds 8x Faders outputs & + 12dB of Gain for CH. 1-8!<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Is MERCURY D SERIES compatible with 500 Series?<\/strong><\/p>\nA: <\/strong>YES… and No.<\/p>\nYes! – The Mercury D Series G810 Rack System will power up, and has the compatible pin out for standard 500 Series Modules.<\/p>\n
No – The Mercury D SeriesPower Suppliesare NOT compatible with any other rack. These are new, proprietary PSUs that can only be used with a Mercury D Series G810 Rack System or future Mercury D Series Equipment. No other manufacturer’s PSU can be used with a Mercury D Series G810 Rack either.<\/p>\n
\nQ: Will Mercury be making D Series Modules?<\/strong><\/p>\nA: <\/strong>YES. Mercury has plans for many Preamps, EQs and Limiters. They’re in early design stages and will bring them to market when they are ready. Please Like the Mercury Facebook Page<\/a> or follow Mercury on Twitter<\/a> to see Products Updates and Previews. Modules were not our main focus, we did not want to be just another company making a 500 mic pre. To do what we want to do in the future we had to have a better power structure than what was available. Power is the foundation of how well any powered device works\u2014period. We also wanted to have a system that is and will be expansive for future growth and products, not just another slotted rack that holds modules. With the Mercury D Series G810 Rack System we succeeded with both. Now we will focus on Mercury D Series Modules and G8 Modules.<\/p>\n\nQ: What is a Mercury G8 Module?<\/strong><\/p>\nA: <\/strong>Mercury D Series G8 Modules are proprietary modules, 2 slots wide (for channels 9 & 10), or 1 slot wide (for channel 10). These innovative modules will hook up to the ribbon cables on the right side of G810 Rack System that will allow you to ‘communicate’ with the modules in channels 1-8. Making it possible for future G8 Summing modules, G8 Mixer modules, G8 Enhancement modules. The Mercury G810 Rack System is not just another rack \u2013 it is a growing, expanding recording system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n![\"\"](\"https:\/\/images.squarespace-cdn.com\/content\/v1\/6445b1620cf46349bfb37386\/07f58d83-c83d-4258-9bd3-4863f14087b4\/mercury_g810_backangle_med.jpg\")
<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – I<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Does Mercury G8 Module work in other racks?<\/strong><\/p>\nA: <\/strong>No. The Mercury D Series G8 Modules are proprietary to the Mercury G810 Rack System and will go in slot 9 & 10 (or some in just slot 10 only).<\/p>\nQ: What is the difference between Mercury D Series G810 Rack System – I and Mercury D Series G810 Rack System – II?<\/strong><\/p>\nA: <\/strong>Mercury D Series G810 Rack System has all the features available in the G8 System. Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, chain for channels 1-10, link for channels 1-10, XLR In\/Out for channels 1-10 and DB25 for channels 1-8.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n![\"\"](\"https:\/\/images.squarespace-cdn.com\/content\/v1\/6445b1620cf46349bfb37386\/ada3d2eb-9a0f-463e-88ad-32c11469edff\/mercury_g810_ii_backangle_med.jpg\")
<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – II<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nMercury D Series G810 Rack System II has the same Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, no chain function, sequential linking only (Ch. 1 to Ch. 2, Ch. 3 to Ch. 4 etc.), XLR In\/Out for channels 9-10 only and DB25 for channels 1-8. Mercury D Series G810 Rack System II is meant to be used with a patch bay so you can chain things together there, instead of on the back of the rack. The Mercury D Series G810 Rack System II is NOT a lower quality system, we just took into consideration that some people will not need all of the features and lowered the cost to help provide a quality product with only the features needed.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
Mercury D Series Mercury Recording Equipment Co. is debuting the Mercury D Se …<\/p>\n","protected":false},"featured_media":18776,"template":"","meta":[],"pwb-brand":[155],"product_brand":[],"product_cat":[1032],"product_tag":[563],"class_list":["post-7037","product","type-product","status-publish","has-post-thumbnail","pwb-brand-mercury-recording","product_cat-serie-500","product_tag-mercury-recording","first","onbackorder","taxable","shipping-taxable","product-type-simple"],"brands":[{"id":155,"name":"MERCURY RECORDING","slug":"mercury-recording"}],"_links":{"self":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product\/7037","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media\/18776"}],"wp:attachment":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media?parent=7037"}],"wp:term":[{"taxonomy":"pwb-brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/pwb-brand?post=7037"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_brand?post=7037"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_cat?post=7037"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_tag?post=7037"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
It might not be the first thing you think of when buying equipment, but the power for any recording device is the foundation of how it works. In Professional Audio a clean, regulated and abundant power supply affects the headroom of your Preamps, Equalizers and Compressor\/Limiters etc… Stable, Abundant, Isolated power simply allows your equipment to work better and avoids cross talk between channels. For example, If you have a rack full of 8 or 10 limiters for drums you are going to hear things distort sooner on peaks if there is not enough power in reserve. We have solved those issues with the Mercury D Series G810 Rack System, allowing you to concentrate on recording music, not calculating the amperage or total power you need in your rack.<\/p>\n
Rock Solid Construction<\/h3>\n
The Mercury D Series G810 Rack System is simply built like a Tank. Featuring thick aluminum rack ears, and a durable steel chassis, for both strength and optimum shielding for internal electronics. Like all Mercury Recording Equipment Co. products, the Mercury D Series G810 Rack System is engineered to be reliable and look good in your studio but built to be road-worthy.<\/p>\n
Only the MERCURY G810 SYSTEM I with G8 BLENDERS MODULE allows Parallel EQ or Compression for all 8 Channels!<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nMercury’s choice was an external PSU so power is shielded away from the modules inside the G810 Rack and to make room more innovative ideas in slots 9 & 10 with our G8 modules and build something more than a ‘rack’. The D Series PSU is also built in a steel chassis so it is shielded from your other equipment and does not pick up interference from outside sources.<\/p>\n
All these choices do affect how well a rack or any electronic device works for audio, but regardless, the DC power of the chosen PSU is then shared by every module in the rack. Either by a cable from external PSU to the rack or internally with a trace on the PCB or wire connecting power from one connector to the next. An easy analogy we use to describe how this works is: the Power Supply is a tree and a branch of the tree goes to each channel, so if there are 10 channels, the tree has 10 branches. But every channel has one source for its power. With the Mercury D Series G810 Rack System the analogy is much different. The D Series PSU is a forest of 10 trees and each channel of the G810 has its own tree and its own source of power.<\/p>\n
A slightly more technical explanation of how a Linear PSU works is: AC (Alternating Current) power (either 120V or 240V in this case) enters the PSU from your wall to with an AC cord to the PSU, it then goes to a Transformer or Transformers that convert(s) that AC voltage to a lower voltage (closer to your intended DC voltage). With an additional circuit, that lower AC voltage then is converted to DC (Direct Current) and regulated to a specific voltage to be stable for your intended device.<\/p>\n
With Mercury D Series G810 and D Series Power Supplies all that happens as well, but in a manner like no other rack on the market. It all starts in the PSU-1 or PSU-2 where the AC enters and is converted to Lower Voltages of AC with an additional circuit, that voltage then enters the G810 and is converted to Stable, DC Power at each EDAC connector for each channel\/module. This gives each channel its own source of Regulated DC power, and in effect its own Isolated Power supply.<\/p>\n
\n\n\n\n\nThe MERCURY G810 SYSTEM I with MERCURY G8 FADERS MODULE. Adds 8x Faders outputs & + 12dB of Gain for CH. 1-8!<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Is MERCURY D SERIES compatible with 500 Series?<\/strong><\/p>\nA: <\/strong>YES… and No.<\/p>\nYes! – The Mercury D Series G810 Rack System will power up, and has the compatible pin out for standard 500 Series Modules.<\/p>\n
No – The Mercury D SeriesPower Suppliesare NOT compatible with any other rack. These are new, proprietary PSUs that can only be used with a Mercury D Series G810 Rack System or future Mercury D Series Equipment. No other manufacturer’s PSU can be used with a Mercury D Series G810 Rack either.<\/p>\n
\nQ: Will Mercury be making D Series Modules?<\/strong><\/p>\nA: <\/strong>YES. Mercury has plans for many Preamps, EQs and Limiters. They’re in early design stages and will bring them to market when they are ready. Please Like the Mercury Facebook Page<\/a> or follow Mercury on Twitter<\/a> to see Products Updates and Previews. Modules were not our main focus, we did not want to be just another company making a 500 mic pre. To do what we want to do in the future we had to have a better power structure than what was available. Power is the foundation of how well any powered device works\u2014period. We also wanted to have a system that is and will be expansive for future growth and products, not just another slotted rack that holds modules. With the Mercury D Series G810 Rack System we succeeded with both. Now we will focus on Mercury D Series Modules and G8 Modules.<\/p>\n\nQ: What is a Mercury G8 Module?<\/strong><\/p>\nA: <\/strong>Mercury D Series G8 Modules are proprietary modules, 2 slots wide (for channels 9 & 10), or 1 slot wide (for channel 10). These innovative modules will hook up to the ribbon cables on the right side of G810 Rack System that will allow you to ‘communicate’ with the modules in channels 1-8. Making it possible for future G8 Summing modules, G8 Mixer modules, G8 Enhancement modules. The Mercury G810 Rack System is not just another rack \u2013 it is a growing, expanding recording system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – I<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Does Mercury G8 Module work in other racks?<\/strong><\/p>\nA: <\/strong>No. The Mercury D Series G8 Modules are proprietary to the Mercury G810 Rack System and will go in slot 9 & 10 (or some in just slot 10 only).<\/p>\nQ: What is the difference between Mercury D Series G810 Rack System – I and Mercury D Series G810 Rack System – II?<\/strong><\/p>\nA: <\/strong>Mercury D Series G810 Rack System has all the features available in the G8 System. Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, chain for channels 1-10, link for channels 1-10, XLR In\/Out for channels 1-10 and DB25 for channels 1-8.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – II<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nMercury D Series G810 Rack System II has the same Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, no chain function, sequential linking only (Ch. 1 to Ch. 2, Ch. 3 to Ch. 4 etc.), XLR In\/Out for channels 9-10 only and DB25 for channels 1-8. Mercury D Series G810 Rack System II is meant to be used with a patch bay so you can chain things together there, instead of on the back of the rack. The Mercury D Series G810 Rack System II is NOT a lower quality system, we just took into consideration that some people will not need all of the features and lowered the cost to help provide a quality product with only the features needed.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
Mercury D Series Mercury Recording Equipment Co. is debuting the Mercury D Se …<\/p>\n","protected":false},"featured_media":18776,"template":"","meta":[],"pwb-brand":[155],"product_brand":[],"product_cat":[1032],"product_tag":[563],"class_list":["post-7037","product","type-product","status-publish","has-post-thumbnail","pwb-brand-mercury-recording","product_cat-serie-500","product_tag-mercury-recording","first","onbackorder","taxable","shipping-taxable","product-type-simple"],"brands":[{"id":155,"name":"MERCURY RECORDING","slug":"mercury-recording"}],"_links":{"self":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product\/7037","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media\/18776"}],"wp:attachment":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media?parent=7037"}],"wp:term":[{"taxonomy":"pwb-brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/pwb-brand?post=7037"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_brand?post=7037"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_cat?post=7037"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_tag?post=7037"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Mercury’s choice was an external PSU so power is shielded away from the modules inside the G810 Rack and to make room more innovative ideas in slots 9 & 10 with our G8 modules and build something more than a ‘rack’. The D Series PSU is also built in a steel chassis so it is shielded from your other equipment and does not pick up interference from outside sources.<\/p>\n
All these choices do affect how well a rack or any electronic device works for audio, but regardless, the DC power of the chosen PSU is then shared by every module in the rack. Either by a cable from external PSU to the rack or internally with a trace on the PCB or wire connecting power from one connector to the next. An easy analogy we use to describe how this works is: the Power Supply is a tree and a branch of the tree goes to each channel, so if there are 10 channels, the tree has 10 branches. But every channel has one source for its power. With the Mercury D Series G810 Rack System the analogy is much different. The D Series PSU is a forest of 10 trees and each channel of the G810 has its own tree and its own source of power.<\/p>\n
A slightly more technical explanation of how a Linear PSU works is: AC (Alternating Current) power (either 120V or 240V in this case) enters the PSU from your wall to with an AC cord to the PSU, it then goes to a Transformer or Transformers that convert(s) that AC voltage to a lower voltage (closer to your intended DC voltage). With an additional circuit, that lower AC voltage then is converted to DC (Direct Current) and regulated to a specific voltage to be stable for your intended device.<\/p>\n
With Mercury D Series G810 and D Series Power Supplies all that happens as well, but in a manner like no other rack on the market. It all starts in the PSU-1 or PSU-2 where the AC enters and is converted to Lower Voltages of AC with an additional circuit, that voltage then enters the G810 and is converted to Stable, DC Power at each EDAC connector for each channel\/module. This gives each channel its own source of Regulated DC power, and in effect its own Isolated Power supply.<\/p>\n
The MERCURY G810 SYSTEM I with MERCURY G8 FADERS MODULE. Adds 8x Faders outputs & + 12dB of Gain for CH. 1-8!<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Is MERCURY D SERIES compatible with 500 Series?<\/strong><\/p>\nA: <\/strong>YES… and No.<\/p>\nYes! – The Mercury D Series G810 Rack System will power up, and has the compatible pin out for standard 500 Series Modules.<\/p>\n
No – The Mercury D SeriesPower Suppliesare NOT compatible with any other rack. These are new, proprietary PSUs that can only be used with a Mercury D Series G810 Rack System or future Mercury D Series Equipment. No other manufacturer’s PSU can be used with a Mercury D Series G810 Rack either.<\/p>\n
\nQ: Will Mercury be making D Series Modules?<\/strong><\/p>\nA: <\/strong>YES. Mercury has plans for many Preamps, EQs and Limiters. They’re in early design stages and will bring them to market when they are ready. Please Like the Mercury Facebook Page<\/a> or follow Mercury on Twitter<\/a> to see Products Updates and Previews. Modules were not our main focus, we did not want to be just another company making a 500 mic pre. To do what we want to do in the future we had to have a better power structure than what was available. Power is the foundation of how well any powered device works\u2014period. We also wanted to have a system that is and will be expansive for future growth and products, not just another slotted rack that holds modules. With the Mercury D Series G810 Rack System we succeeded with both. Now we will focus on Mercury D Series Modules and G8 Modules.<\/p>\n\nQ: What is a Mercury G8 Module?<\/strong><\/p>\nA: <\/strong>Mercury D Series G8 Modules are proprietary modules, 2 slots wide (for channels 9 & 10), or 1 slot wide (for channel 10). These innovative modules will hook up to the ribbon cables on the right side of G810 Rack System that will allow you to ‘communicate’ with the modules in channels 1-8. Making it possible for future G8 Summing modules, G8 Mixer modules, G8 Enhancement modules. The Mercury G810 Rack System is not just another rack \u2013 it is a growing, expanding recording system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – I<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nQ: Does Mercury G8 Module work in other racks?<\/strong><\/p>\nA: <\/strong>No. The Mercury D Series G8 Modules are proprietary to the Mercury G810 Rack System and will go in slot 9 & 10 (or some in just slot 10 only).<\/p>\nQ: What is the difference between Mercury D Series G810 Rack System – I and Mercury D Series G810 Rack System – II?<\/strong><\/p>\nA: <\/strong>Mercury D Series G810 Rack System has all the features available in the G8 System. Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, chain for channels 1-10, link for channels 1-10, XLR In\/Out for channels 1-10 and DB25 for channels 1-8.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n<\/p>\n<\/p>\n\n<\/div>\n<\/div>\n\nMercury D Series G810 Rack System – II<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\nMercury D Series G810 Rack System II has the same Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, no chain function, sequential linking only (Ch. 1 to Ch. 2, Ch. 3 to Ch. 4 etc.), XLR In\/Out for channels 9-10 only and DB25 for channels 1-8. Mercury D Series G810 Rack System II is meant to be used with a patch bay so you can chain things together there, instead of on the back of the rack. The Mercury D Series G810 Rack System II is NOT a lower quality system, we just took into consideration that some people will not need all of the features and lowered the cost to help provide a quality product with only the features needed.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
Mercury D Series Mercury Recording Equipment Co. is debuting the Mercury D Se …<\/p>\n","protected":false},"featured_media":18776,"template":"","meta":[],"pwb-brand":[155],"product_brand":[],"product_cat":[1032],"product_tag":[563],"class_list":["post-7037","product","type-product","status-publish","has-post-thumbnail","pwb-brand-mercury-recording","product_cat-serie-500","product_tag-mercury-recording","first","onbackorder","taxable","shipping-taxable","product-type-simple"],"brands":[{"id":155,"name":"MERCURY RECORDING","slug":"mercury-recording"}],"_links":{"self":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product\/7037","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media\/18776"}],"wp:attachment":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media?parent=7037"}],"wp:term":[{"taxonomy":"pwb-brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/pwb-brand?post=7037"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_brand?post=7037"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_cat?post=7037"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_tag?post=7037"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Q: Is MERCURY D SERIES compatible with 500 Series?<\/strong><\/p>\n A: <\/strong>YES… and No.<\/p>\n Yes! – The Mercury D Series G810 Rack System will power up, and has the compatible pin out for standard 500 Series Modules.<\/p>\n No – The Mercury D SeriesPower Suppliesare NOT compatible with any other rack. These are new, proprietary PSUs that can only be used with a Mercury D Series G810 Rack System or future Mercury D Series Equipment. No other manufacturer’s PSU can be used with a Mercury D Series G810 Rack either.<\/p>\n \nQ: Will Mercury be making D Series Modules?<\/strong><\/p>\n A: <\/strong>YES. Mercury has plans for many Preamps, EQs and Limiters. They’re in early design stages and will bring them to market when they are ready. Please Like the Mercury Facebook Page<\/a> or follow Mercury on Twitter<\/a> to see Products Updates and Previews. Modules were not our main focus, we did not want to be just another company making a 500 mic pre. To do what we want to do in the future we had to have a better power structure than what was available. Power is the foundation of how well any powered device works\u2014period. We also wanted to have a system that is and will be expansive for future growth and products, not just another slotted rack that holds modules. With the Mercury D Series G810 Rack System we succeeded with both. Now we will focus on Mercury D Series Modules and G8 Modules.<\/p>\n \nQ: What is a Mercury G8 Module?<\/strong><\/p>\n A: <\/strong>Mercury D Series G8 Modules are proprietary modules, 2 slots wide (for channels 9 & 10), or 1 slot wide (for channel 10). These innovative modules will hook up to the ribbon cables on the right side of G810 Rack System that will allow you to ‘communicate’ with the modules in channels 1-8. Making it possible for future G8 Summing modules, G8 Mixer modules, G8 Enhancement modules. The Mercury G810 Rack System is not just another rack \u2013 it is a growing, expanding recording system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n Q: Does Mercury G8 Module work in other racks?<\/strong><\/p>\n A: <\/strong>No. The Mercury D Series G8 Modules are proprietary to the Mercury G810 Rack System and will go in slot 9 & 10 (or some in just slot 10 only).<\/p>\n Q: What is the difference between Mercury D Series G810 Rack System – I and Mercury D Series G810 Rack System – II?<\/strong><\/p>\n A: <\/strong>Mercury D Series G810 Rack System has all the features available in the G8 System. Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, chain for channels 1-10, link for channels 1-10, XLR In\/Out for channels 1-10 and DB25 for channels 1-8.<\/p>\n<\/div>\n<\/div>\n<\/div>\n Mercury D Series G810 Rack System II has the same Mercury Power Structure, rack-mountable or tabletop usability, G8 module compatible in slots 9 & 10, Ground Lift, no chain function, sequential linking only (Ch. 1 to Ch. 2, Ch. 3 to Ch. 4 etc.), XLR In\/Out for channels 9-10 only and DB25 for channels 1-8. Mercury D Series G810 Rack System II is meant to be used with a patch bay so you can chain things together there, instead of on the back of the rack. The Mercury D Series G810 Rack System II is NOT a lower quality system, we just took into consideration that some people will not need all of the features and lowered the cost to help provide a quality product with only the features needed.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":" Mercury D Series Mercury Recording Equipment Co. is debuting the Mercury D Se …<\/p>\n","protected":false},"featured_media":18776,"template":"","meta":[],"pwb-brand":[155],"product_brand":[],"product_cat":[1032],"product_tag":[563],"class_list":["post-7037","product","type-product","status-publish","has-post-thumbnail","pwb-brand-mercury-recording","product_cat-serie-500","product_tag-mercury-recording","first","onbackorder","taxable","shipping-taxable","product-type-simple"],"brands":[{"id":155,"name":"MERCURY RECORDING","slug":"mercury-recording"}],"_links":{"self":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product\/7037","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media\/18776"}],"wp:attachment":[{"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/media?parent=7037"}],"wp:term":[{"taxonomy":"pwb-brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/pwb-brand?post=7037"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_brand?post=7037"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_cat?post=7037"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/masteringmansion.com\/pro-audio\/wp-json\/wp\/v2\/product_tag?post=7037"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}<\/div>\n<\/div>Mercury D Series G810 Rack System – I<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n<\/div>Mercury D Series G810 Rack System – II<\/h4>\n<\/div>\n<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n