Barefoot Sound Footprint \u00ae 01 Second Generation
\nRedesigned from the inside out. A new generation of precision.
\nThe Footprint \u00ae 01 Gen2 is a complete reinvention of one of Barefoot Sound\u2019s most acclaimed
\nmonitors, redesigned from the ground up to deliver even greater precision, power, and
\ntransparency. While the original Footprint \u00ae 01 set a high standard for compact professional
\nmonitors, the Gen2 surpasses it in every meaningful way, both technically and sonically. This
\nnext generation model introduces a fully tri-amplified 3-way architecture, providing dedicated
\nClass D amplification for each driver to ensure optimal performance, headroom, and efficiency
\nacross the frequency spectrum.
\nAt the heart of the Footprint \u00ae 01 is a suite of newly developed Barefoot drivers, including a 1-inch
\ndual ring radiator tweeter, a 5-inch aluminum cone midrange driver, and dual 8-inch aluminum
\ncone woofers integrated into the cabinet using the proprietary Dual-Force\u2122 Technology
\ncoupling system. Engineered for extended linear excursion, reduced distortion, and improved
\ntransient response, these custom drivers deliver tighter imaging and a more revealing
\nsoundstage.
\nThe new DSP platform features SPOC\u2122 (SPectrally Optimized Conversion), Barefoot\u2019s
\npatented technology that introduces analog crossover filtering before digital conversion,
\npreserving high frequency detail and significantly improving signal to noise ratio. This allows the
\nGen2 to achieve higher resolution, improved clarity, and ultra low latency for an unmatched
\nmixing and monitoring experience.
\nTo support all this technological advancement, the cabinet itself has been acoustically refined
\nwith increased internal volume, optimized bracing, and enhanced damping, housed in a sealed
\nenclosure with a sleek industrial finish. Together, these innovations make the Footprint \u00ae 01
\nGen2 not just a worthy successor but a truly next level monitor that brings flagship performance
\nto a wider range of studios and creators.
\nWhether you're mixing in stereo or building a 7.1.4 immersive studio, the Barefoot Sound
\nFootprint \u00ae 01 Gen2 delivers elite performance in a footprint that's right-sized for today\u2019s
\nproduction environments. It's the perfect fusion of next-generation engineering, real-world
\nversatility, and Barefoot\u2019s legendary sonic signature.
\nThe Leader in the Footprint Lineup<\/p>\n
As Barefoot Sound launches the Footprint \u00ae 01 Gen2, it marks a significant evolution in the
\nFootprint series, a lineup known for delivering uncompromising sound in more accessible
\nformats. The original Footprint \u00ae 01, the largest and most powerful model in the range, set the
\nstandard as the flagship of the \u201caffordable Footprint\u201d line. It was followed by the Footprint02,
\nslightly smaller and more cost effective, yet still packed with the same uncompromising sonic
\nDNA. The Footprint \u00ae 03 introduced a more compact, ported design, becoming the most
\naffordable and space friendly monitor in the series. Completing the family is the Footprint \u00ae 03C,
\ninitially developed as a dedicated center channel for immersive setups but now widely
\nembraced as a versatile stereo solution. With the launch of the Gen2, the Footprint01 returns as
\na completely reimagined monitor, delivering next generation precision, power, and performance
\nthat reestablishes its place at the top of the Footprint lineup.
\nComplete Redesign. Compact Revolution.
\nTri-Amplified 3-Way Architecture
\nThe Footprint \u00ae 01 Gen2 is a fully tri-amplified system, featuring dedicated Class D amplifier
\nmodules for each driver:
\n\u25cf 60W for the 1" dual ring radiator tweeter
\n\u25cf 150W for the 5" aluminum cone midrange driver
\n\u25cf 500W for the dual 8" aluminum cone woofers<\/p>\n
This architecture ensures maximum headroom, minimal distortion, and perfectly tuned
\ncrossover transitions (170 Hz \/ 3600 Hz), delivering seamless clarity from 36 Hz to 40 kHz.
\nDrivers Reimagined
\nTweeter
\nThe newly designed 1-inch dual-ring radiator tweeter, now featuring a signature aluminum-
\ncolored cone, includes a stronger magnet, extended linear excursion, and improved thermal
\nhandling. Housed in a precision-machined aluminum enclosure with a rear waveguide chamber,
\nit delivers crisp transient response, accurate imaging, and extended high-frequency detail with
\nexceptionally low distortion.
\nMidrange<\/p>\n
A powerful 5-inch aluminum cone midrange driver sits at the heart of the Gen2. Upgraded with a
\nlarger voice coil, a more robust motor structure, and an extended excursion range, it delivers
\nrazor sharp clarity and exceptional phase coherence, making it ideal for critical mix decisions.
\nWoofers
\nDual 8\u201d aluminum cone Dual-Force\u2122 woofers anchored in a rugged cast aluminum frame form
\nthe backbone of the Gen2\u2019s low end response. These are integrated with Barefoot's exclusive
\nDual-Force\u2122 Technology coupling system, which not only cancels internal vibrations but also
\nacts as a structural brace, enhancing cabinet rigidity and delivering clean, powerful bass down
\nto 30 hertz.
\nAdvanced DSP with SPOC\u2122 Technology
\nAt the core of the Gen2 lies Barefoot\u2019s proprietary SPOC\u2122 (Spectrally Optimized
\nConversion) system. By incorporating analog crossover filtering before digital conversion,
\nSPOC allows the high-frequency signal to enter the DSP unattenuated. This unique approach
\nprovides:
\n\u25cf 15 dB better signal-to-noise ratio
\n\u25cf Higher digital resolution
\n\u25cf Improved transient response
\n\u25cf Reduced latency<\/p>\n
Coupled with a new low latency DSP engine, the Gen2 delivers pristine sonic accuracy, tighter
\nbass tuning, and enhanced spatial imaging, essential for immersive audio workflows and
\nprecision mixing.
\nRugged, Refined Cabinet Design
\nThe cabinet of the Gen2 is built from medium-density fiberboard (MDF) using stress assembly
\ntechniques that enhance structural rigidity and minimize resonance. With a total internal volume
\nof 12.8 liters and full acoustic damping throughout, the enclosure is tuned for optimal dispersion
\nand transient response. A textured gray polyester coating gives the Gen2 a modern,
\nprofessional finish, while its increased weight adds mechanical stability and performance
\nintegrity.
\nDimensions:
\n\u25cf Speaker: 14.25" x 10.20" x 13.63" (362 mm x 259 mm x 346 mm)<\/p>\n
\u25cf Weight: 40.4 lbs (18.3 kg)<\/p>\n
MEME\u2122 Technology for Real-World Translation
\nThe Footprint \u00ae 01 Gen2 also features Barefoot\u2019s MEME\u2122 (Multi Emphasis Monitor Emulation)
\nTechnology, enabling you to instantly switch between multiple reference speaker types. For
\nexample, you can vibe in Hi-Fi mode while composing and then switch to FLAT mode for critical
\nmixing decisions. With MEME\u2122 you get an analytical and inspirational speaker all in one!<\/p>\n
Specifications Summary
\nDescription 8-inch Tri-amplified 3-way studio monitor
\nControls Input level stepped attenuator, MEME\u2122 voice select
\nInput Impedance Balanced XLR, 20k Ohm Impedance
\nSensitivity 90dB @ 1 meter with -15dBV input signal<\/p>\n
(Level control set to 0dB)<\/p>\n
Frequency Response 36Hz \u2013 40kHz (\u00b13dB), 39Hz \u2013 30kHz (\u00b11dB)
\nBass Response -3 dB @ 36 Hz, Q = 0.762, Slope = 18 dB\/octave<\/p>\n
asymptotic<\/p>\n
Crossover
\nFrequencies<\/p>\n
170 \/ 3600 Hz<\/p>\n
Tweeter 1-inch dual-ring radiator, high magnetic flux motor, rear<\/p>\n
waveguide chamber<\/p>\n
Midrange 5-inch aluminum cone, high magnetic flux motor
\nWoofers Dual 8\u201d aluminum cones,- high magnetic flux motors
\nHigh Frequency Amp 60W
\nMid Frequency Amp 150W
\nLow Frequency Amp
\nMax Peak SPL<\/p>\n
500W
\n\u2265113dB<\/p>\n
AC Power Input 100 VAC to 240 VAC
\nPower Consumption Idle: 35W \/ Max: 900W<\/p>\n
Cabinet Design Sealed box, machined aluminum driver baffle,<\/p>\n
tensioned bracing<\/p>\n
Cabinet Volume 12.8L total internal volume with acoustic damping<\/p>\n
throughout<\/p>\n
Weight 40.4 lbs (18.3 kg) each
\nShipping Weight 45.0 lbs (20.4 kg) each
\nShipping Dimensions 22.75 x 13.8 x 17.5 in (578 mm x 350 mm x 445 mm)
\nSpeaker Dimensions 14.25 x 10.20 x 13.63 in (362 mm x 259 mm x 346 mm)<\/p>\n","protected":false},"excerpt":{"rendered":"