The POWERGRIP YG-3 clean power console is equipped with the most reliable protection system. You can be sure that no network problems will disable your equipment.
The console itself is capable of trouble-free operation up to a voltage of 320 V.
25 amps*, 5750 watts. This is enough to power the most serious stereo system or home theater. 6 sockets are designed specifically for power amplifiers.
* Power cable and plug are rated for 16A
7 touch buttons.
Mobile application for management and control, working on Wi-Fi.
The consumption sensor turns on the system if one of the consumers comes out of standby mode.
RS232 trigger input and output and Ethernet option for professional control systems.
The light sensor will dim the glow or turn off the screen in the dark.
AND NOT ONLY
Wi-Fi for remote control.
Extensive settings menu.
Pluggable DC filter.
Displays many network settings.
* 160 – 320 V console power supply continuous uptime range
* Maximum current through the console 25 A (5750 W)
* Maximum current through the power cable connector 16 A (3680 W)
* Own power consumption 1.4 W – 20 W (depending on functionality)
* Consumption at full shutdown 0 W
* Zero pass resistance < 0.00005 Ohm
* Phase resistance (high current hi-fi filter without fuse and cable) 0.015 ohm
* Fuse rating resistance: 0.01 ohm (with holder), size: 5 x 20 mm, current: 16 A
* DC measurement range ± 999 mV
* The maximum value of the absorbed constant component is 1.8 V
* Maximum on/off delay 60 s
* Limits of protection operation (disconnection of consumers) lower: 190 V, upper: 256 V
* May vary depending on mains sine wave distortion and other additional parameters to provide maximum protection and avoid false alarms
* Surge protection varistors
SETUP AND CONTROL
* Controls seven touch buttons mechanical button of full shutdown
* Wi-Fi remote control (service provided by Ewelink service)
* Integration with control systems (RTI, Сontrol4, Crestron, etc.) trigger, RS232, Ethernet (option)
* OSD settings menu brightness, color, style, filtering, always-on sockets, delays
* Automatic switching on consumption sensor, (detection of the exit from the standby mode of the consumer), light sensor, (detection of the level of illumination in the room)
* Power console included
* Power cable (2 m)
* Rack mounts
* Antenna ground wire
* Plug for direct cable entry
* Number of sockets 12
* Power cable cross section 3.3 mm²
* Cross-section of power cables internal wiring 3.3 mm² (High current Hi-Fi section)
* Console weight 7.6 kg
* Dimensions (H x W x D) 156.5 x 440 x 280 mm (with feet)