Descripción
«Building upon its 25-year legacy producing revered recording studio equipment, Manley Labs has distilled its CORE technologies from this lineage. 2014 delivers the Manley CORE, an innovative channel strip that combines Manley’s Greatest Hits with fresh technology. The remarkably intuitive front panel combines musical and forgiving circuitry that allows the musician to concentrate on his performance instead of being lost in a sea of knobs. Ease of use and intelligently chosen operating points make it virtually impossible to cut a bad sounding track!
Manley’s experience and insight working with the industry’s top recording engineers and musicians culminates in the CORE. At this price, there is no other channel-strip with higher headroom or more seductive sound than the CORE. Handcrafted in the USA, built like a tank, built to endure, the epicenter of your recorded art will be the Manley CORE.
Features and Specifications
ALL-TUBE preamplifier audio path using 1 x 12AX7WA for gain and 1 x 6922 White Follower
Balanced Transformer Coupled XLR Microphone Input Impedance: 1250 Ohms
Balanced XLR Line Input Impedance: 10 kOhms
Unbalanced 1/4″» Direct Input Impedance: 10 Meg Ohm
Hi-current drive Direct Output Impedance: 50 Ohms
Silent conductive plastic INPUT attenuator
Compressor Maximum GAIN REDUCTION: 16 dB
Compressor ATTACK time:
150 ms slowest CCW to 14 ms fastest CW for 6dB compression
Compressor RELEASE time:
150 ms slowest CCW to 2.63 ms fastest CW from 6dB compression
Limiter ATTACK time: 115μs
Limiter RELEASE time:
300 ms slowest CCW, 150 ms at 12:00, 2.3 ms fastest CW
Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD
Maximum Input Mic input (High Gain Setting): -25 dBu or 44mV RMS @ 0.5% THD
Maximum Input Line input (Low Gain Setting): +13 dBu or 3.5V RMS @ 0.5% THD
Maximum Input Line input (High Gain Setting): -8 dBu or 300mV RMS @ 0.5% THD
Maximum Input Direct input (Low Gain Setting): +24 dBu or 12V RMS @ 0.5% THD
Maximum Input Direct input (High Gain Setting): +17 dBu or 5.5V RMS @ 0.5% THD
Maximum Input Insert return: +20 dBu or 7.8V RMS @ 0.5% THD
Maximum Preamp Output (Insert Send): +35 dBu or 43V RMS @ 0.5% THD
Maximum Main Output: +20 dBu
Insert Send output impedance: 50 Ohms
Insert Return input impedance: 13 kOhms
Main Output Impedance: 50 Ohms
Direct Output Headroom (referenced to +4 dBv): 31 dB
Main Output Headroom (referenced to +4 dBv): 16 dB
Dynamic Range: >90 dB
Frequency Response: 10 Hz to 20 kHz ±0.5 dB
Large LED illuminated VU METER
Meters switch to read Direct Output (1) from preamp, Output (2) from Main Out, or Compressor Gain Reduction
THD & Noise (1kHz @ +4 dBm): 0.02% at Low Gain setting
Noise Floor (Gain set to minimum): -70 dB wideband typical
Gain via Microphone Input: 40 or 60 dB
Gain via Line Input: 20 or 40dB
Maximum Gain of EQ & Limiter section: 10 dB
AUTOMUTE warmup delay: 30 seconds
Power consumption: 35 Watts
Operating mains voltage: 90 to 254 VAC (internal universal supply)
Mains Voltage Frequency: 50~60Hz
Dimensions: 19 x 3 1/2 x 7 (occupies 2u)
Unit weight: 8 lbs.
Shipping weight: __ lbs. «
