Descripción
Single Channel API 200-Rack Legacy / Vision Mic Preamp
Overview
Authentic Transparency for Unrestricted Creativity- Fits in API 200 frame and API Legacy and Vision consoles
- Continuously variable gain control
- DC coupled ribbon mic with 10dB gain boost setting
- 48V phantom power
- 15 dB Pad
-
Specifications
Minimum Gain 8.5 dB Maximum Gain (continuously variable) 60 dB (70 dB in Ribbon Mode) Frequency Response (+0 / -3 dB) sub 3 Hz to beyond 300 kHz Noise (60 dBu Gain, 10 Hz – 30 kHz, Inputs common) -130 dB EIN Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz – 20 kHz bandwidth, +27 dBu Out) < .001%, Typ. < .0005% (< 5 ppm) Intermodulation Distortion ((50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out) < .0009% Phase Response (35 dB Gain, 50 Hz – 20 kHz bandwidth, +27 dBu Out) < 2 degrees deviation Common Mode Rejection Ratio (35 dB Gain, 10 Hz – 20 kHz bandwidth, 100 mV C.M.) > 65 dB, Typ > 85 dB Slew Rate (35 dB Gain, +27 dBu Out) > 25 Volts per microsecond Maximum Input Level (20 Hz – 40 kHz) +20 dBu (no attenuator pads required) Maximum Output Level (20 Hz – 40 kHz) +28 dBu Phantom Input Impedance (1 kHz) 6,750 ohms Output Impedance 24.3 Ohms (x2) Phantom Powering +48 V dc, +/- 2 V dc Dimensions/Shipping Weight 1-1/8” W x 2-5/8” H x 5-7/8” D, 1 lb. Reviews & Awards
The HV-32 is an HV-35 modified to fit in an API 200 rack, Legacy or Vision console.
Randy Poole – Pro Audio Review
«The HV-35 was consistently in my top two for all tests with the Radial Workhorse chassis. In comparison to transformer-based Class-A designs, it was more open on the top with less compression of transients and a more detailed sense of ambience and space. Compared to some of my favorite tube-based pres, the HV-35’s low end was punchier and thicker. The HV-35’s high end was accurate and pleasing, while in comparison the tube pre’s additive harmonics and softening of transients felt quite flattering on acoustic guitar. Overall, the timbre of the HV-35 was more balanced than all of its tested counterparts, and its placement in the stereo field was more “three-dimensional.»Craig Anderton, Electronic Musician
«The HV-35 is extremely well-built, sounds great (well actually, it’s more like it has no sound at all), and the DI is well-implemented. It accomplishes its goal of transparency, but also has the depth that’s the hallmark of a well-designed amplifier.»Paul Vnuk, Recording Magazine
«I ran the new HV-35 right alongside my original HV-3D and after matching the input settings I can say, “I hear zero difference in sonic character or quality!” None! I have no idea how they crammed all of the HV-3D’s electronics in there and how they scaled the power to work within the 500-Series voltage restrictions, but somehow they did it.»
Jack Vad, award winning producer/engineer for the San Francisco Symphony
«Since 1992 when I was Millennia’s first customer, I’ve had the privilege of lending my ear and thoughts regarding new developments and products.»«The San Francisco Symphony has always owned both Millennia preamps and convertors because they meet our criteria of transparency and resolution, and since I’ve been asking John and Joel to develop 500 series modules for years, I’m extremely pleased by the release of both the AD-596 and HV-35.»
«They both represent everything I expect from Millennia products which, in this case, are now offered in a new form factor utilizing proven designs and providing subsequently greater versatility.»
Donal Hodgson, producer/engineer for Sting and many others
“For me it was a no brainer when I heard that Millennia were releasing a 500 series mic amp.”“I put 48 channels of HV-3D into Sting’s tour rig and I wanted access to that super clean pure sound in my portable 500 series rack.”
