Descripción
«The DRS-8 mk2 is an 8 channel microphone pre-amp with 8 DI inputs. We know you will be as pleased with it’s sonic qualities as we are. The DRS-8 mk2 has the advantages of more than 25 years experience in audio engineering, today’s component and manufacturing technology, but still retaining that sound uniquely achievable through Class A design. Phoenix Audio is dedicated to the development of Class A discrete technology used within high build-quality equipment. The DRS-8 mk2 uses our well proven and loved Class A output stage (DSOP-2) coupled with our custom wound output transformer, but also has our latest breakthrough in transformerless Class A, Discrete, truly-balanced Mic Input Technology which gives a “valve-like” sound. It also incorporates our high input impedance DI circuitry.
Specifications
Specifications
2U half rack space unit: With 240V/110V mains voltage input selector switch Class A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,
Maximum Output Level: +26dBu @ 1kHz
Noise: -90dB @ 20Hz to 20kHz.
Connections: Combo XLR/1/4” XLR sockets on Rear Panel for Mic inputs & line inputs and switched jacks for DI inputs
Output connections: XLR’s on rear panel
Additional outputs: 25 pin “D” style connector on the rear panel (wired Tascam Standard)
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Phoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage with 10k impedance.
Phoenix Audio’s custom wound output transformer.
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction: -15dB push-button pad switch (Mic input)
High Input Impedance DI: Mono 1/4″ Jack on rear panel (no FETs) with 10 meg impedance
Gain Meter: LED Metering. 5 LED Meter on each channel (with hysteresis)
Detented output control for recall, 21 positions
Phantom Power: Switchable phantom on Push-button Switch
High Pass Filter: Roll-off starts at 80Hz @ 12dB per Octave.
Phase Reverse: on Push-button Switch
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom: +26dB on Mic-Pre stage
DI Stage gain: Maximum of 26dB (gain range typically 30db)
All units are wired with PTFE silver military grade cable
»
