Descripción
- Kondensatormikrofon
- Kugel
- Kleinmembrankapsel
- Nickelmembran
- Transistorverstärker
- Phantomspeisung P48
specification
The M 296 condenser microphone is an addition to the metal diaphragm microphone family which includes the M 294 / M 295. Based on the nearly linear frequency response of the transmission factor up to 20 kHz it guarantees orthophonic recordings in the near and far field as well as recordings of high sound levels. It is designed for professional applications in radio and television broadcasting, sound studios, concert halls, theatres and for high-quality recordings of all genres.
The transformerless microphone preamplifier shows a high output capability and has a symmetrical output stage. A 10 dB preattenuation pad and the bass roll-off extend the application range. The two switches are sunk into the middle of the preamplifier.
A special version -the M 296 S- is available for measurement applications. Its frequency response complies with DIN IEC 651 for Class 2 sound level meters.
technical data
| Polar pattern | omni | |
| Acoustic operating principle | pressure transducer | |
| Frequency range | 20 Hz to 20.000 Hz | |
| Sensitivity at 1 kHz | 15 mV/Pa | |
| Switch position «reduced bass roll-off» at 90 Hz | -10 dB | |
| Output impedance | 150 Ohm | |
| Noise level | CCIR 468-4 | 22 dB |
| DIN EN 60268-4 | 14 dB-A | |
| Signal-to-noise ratio | CCIR weighted | 72 dB |
| A-weighted | 80 dB | |
| SPL for THD 0,5 % | 134 dB | |
| with 10 dB preattenuation | 144 dB | |
| Dynamic range | 120 dB | |
| Current consumption | 3 mA | |
| Output connector | XLR3M | |
| Weight | 157 g | |
| Length | 156 mm | |
| Diameter | 21/24 mm | |
| Surface | satin nickel, black matt | |
