Descripción
- condenser microphone
- omni-directional
- small diaphragm capsule
- PE diaphragm
- transistor pre-amplifier
- phantom powering P48
specification
The miniature condenser microphone system SMS 2000 consists of a microphone preamplifier and exchangeable capsules with the polar patterns cardioid, hypercardioid and omnidirectional. Accordingly, the microphones M 200, M 210 and M 270 are available. This allows universal applications in professional recording and sound reinforcement. The transformerless circuit design substitutes the previous transformer for a symmetrical output stage. The preamplifier is distinguished by its remarkably low intrinsic noise and output capabilities. The module system adjusted to optimum reproduction properties allows a particularly clean and colourless sound reproduction.
It is possible to activate a 10 dB preattenuation for handling very high sound pressure levels. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect. The two switches are sunk into the middle of the microphone.
technical data
| Polar pattern | omni | |
| Acoustic operating principle | pressure transducer | |
| Frequency range | 20 Hz to 20.000 Hz | |
| Sensitivity at 1 kHz | 10 mV/Pa | |
| Output impedance | 150 Ohm | |
| Noise level | CCIR 468-4 | 26 dB |
| DIN EN 60268-4 | 18 dB-A | |
| Signal-to-noise ratio | CCIR weighted | 68 dB |
| A-weighted | 76 dB | |
| SPL for THD 0,5 % | 138 dB | |
| with 10 dB preattenuation | 148 dB | |
| Dynamic range | 120 dB | |
| Current consumption | 3 mA | |
| Output connector | XLR3M | |
| Weight | 130 g | |
| Length | 166 mm | |
| Diameter | 21 mm | |
| Surface | satin nickel, black matt | |
